Not so way back, I reviewed the Fujifilm Instax SQ6 ,and I completely beloved it. Its compact design and medium format sq. movie instantly made it my favourite Instax digicam. Since then, Fujifilm requested me to evaluate their newest printer, the Instax SP-3. Admittedly, I used to be a bit skeptical at first, however that is positively rising on me. 

Construct High quality and Usability

As with all present Instax cameras and printers, the SP-Three is made predominantly of plastic, though it positively doesn’t really feel low-cost. The tender contact end may be very pleasing and the buttons have a satisfying tactile really feel to them. The printer is a bit chunky and barely uncomfortable to deal with with one hand; nevertheless, it is a minor concern at finest.  

With regard to its measurement, the SP-Three is barely bigger than the SQ6 and positively not one thing that is going to slot in your pocket. I would not name it unwieldy or troublesome to pack with the remainder of your gear, however it’s nonetheless bigger.

Not like most of the analog Instax cameras, this printer operates with a chargeable battery. I actually recognize this characteristic as a result of it is one much less factor to fret about. The SQ6 for some motive makes use of two CR2 batteries, which are not the most well-liked alternative. The truth that the SP-Three makes use of a chargeable battery is handy. The LED lights on the highest of the printer point out what number of photographs are left, which is a pleasant contact. This may occasionally not look like an enormous factor, nevertheless it’s a kind of little touches that simply makes utilizing the printer way more pleasing.  

One other characteristic that I actually like in regards to the printer is the “Reprint” button. This lets you shortly make a reproduction of any picture you’ve already printed. That is nice, as a result of in lots of conditions, if I take a picture of somebody, greater than probably, they need a duplicate too. 

The app additionally comprises an entire historical past of all the pictures you’ve printed, which means that it is very easy to return and reprint any earlier picture. I’ve used this characteristic fairly a bit, really; subsequently, I discover it very sensible. 

My favourite factor about this printer is the truth that you possibly can print any picture that’s in your telephone. This does not need to be photographs taken by your telephone, which actually opens up the probabilities of the form of photographs you possibly can print. 

Picture High quality

Sq. is certainly the way in which ahead for Instax. The earlier mannequin, the SP-2, used the Instax Mini movie, and I simply by no means bothered to contemplate it. The SP-Three makes use of a lot bigger movie with its sq. format, and I feel it is the right steadiness between the Instax Vast and Instax Mini. The great thing about this printer is that picture high quality varies fairly a bit relying on what kind of picture you print. In fact, there may be an higher restrict based mostly on the precise movie itself. Even so, it is fairly unbelievable how one can have photographs out of your full-frame DSLR digicam printed nearly instantly from this printer. My most popular digicam to mix with the SP-Three is the Fujifilm X100F. This can be a digicam I’ve on my particular person at nearly all occasions; subsequently, it really works nice for me. I do, nevertheless, imagine that many individuals will in all probability use their smartphones to take the pictures they wish to print.

Shot with the Canon 5DS R and 24mm TS-E

Shot with the Canon 5D Mark IV and Sigma 85mm Artwork

Dynamic vary continues to be an space the place the movie suffers, even with photographs which might be accurately uncovered. The pictures above are good examples of that. Elements of the mannequin’s face and his footwear are blown out within the print, however not within the precise digital picture. The picture with the constructing seems even worse relating to dynamic vary. The colours have extreme banding, and the high-contrast areas between the lights and darks within the constructing do not work very effectively. Understanding the boundaries are in fact necessary; nevertheless, in real-world use, I have never discovered this to be a significant concern when printing a lot of my photographs. Basically, when you’re printing high-quality photographs taken along with your “correct” digicam, then you definately should not count on tremendous high-quality outcomes. Then again, as talked about above, I imagine most individuals will greater than probably use their smartphones with this printer, and I am very happy with these outcomes. Excessive-contrast areas nonetheless undergo, however with the restricted dynamic vary of most smartphones, I doubt this shall be a significant concern for many individuals. The movie aesthetic nonetheless comes by means of actually properly, and there’s a sure appear and feel to the pictures that I feel can solely be expressed correctly whenever you bodily maintain the pictures. The pictures under have been all shot with a smartphone. 

The App

My first impressions of the app have been that I believed it regarded a bit dated. The interface is a bit crowded, however admittedly, it is fast and efficient. The wonderful thing about the SP-Three is that there isn’t any have to arrange the printer or the app. When you hook up with Wi-Fi (which may be very easy), you merely open the app and also you’re good to go. The app will ask for permission to entry your photographs, after which it is a easy matter of choosing your photographs and printing them.

I personally don’t edit any of the pictures within the precise app, principally as a result of there are not any correct options. I feel the dearth of enhancing choices is a giant missed alternative. Fuji might have supplied a few of their movie profiles within the app, which I feel would have been unbelievable. Basic Chrome is certainly my favourite; nevertheless, taking pictures with the X100F implies that I can apply that profile earlier than sending it to print. The one factor that annoys me in regards to the app is that even when your picture is completely sq., the app will nonetheless at all times apply a slight crop on all sides. This makes composing barely difficult, and it’s essential to go away a bit respiratory room to your photographs. 

The app additionally lets you join on to your Instagram and Fb accounts, permitting you to print immediately from social media. This I discover to be an important characteristic, as a result of many photographs on Instagram are within the right facet ratio anyway. All in all, though the app seems to be a bit dated, it really works very effectively and may be very efficient. 

What I Appreciated

  • Tremendous simple to arrange.
  • Rechargeable battery.
  • Means that you can print photographs from basically any digicam.
  • Makes use of the bigger sq. format movie as a substitute of Instax Mini.
  • Comparatively moveable.

What I Did not Like

  • Clunky app design with restricted options.
  • The dynamic vary of movie, though saying that, I really feel it is considerably of an unfair criticism too. 
  • Battery life is not nice; I’ve managed about 30 prints on one cost. 

Remaining Ideas

Personally, I am nonetheless extra of a fan of correct movie cameras just like the SQ6, purely as a result of the feel and appear are troublesome to match. The SQ6 can be barely extra moveable, making it simpler to hold round with me. Having mentioned that, I really actually just like the SP-Three for barely completely different causes. For one, errors aren’t an issue with the SP-3, as a result of you possibly can management precisely which picture you are going to print. With the SQ6, when you compose simply barely off or the publicity is a bit flawed, then that is the picture. There isn’t any delete possibility with a correct movie digicam. The SP-3, however, provides you a whole lot of flexibility. Make a mistake with a shot, no downside, take one other and solely print those you want. This basically makes the SP-Three extra economical, as a result of it prevents wasted photographs. Comparatively talking, the movie is not precisely low-cost, and the price of wasted photographs can actually begin to add up. Aside from that, the little touches are what make this printer a pleasure to make use of. The reprint button and rechargeable battery make it a very good, well-rounded product. Lastly, the worth of this printer in a social context can’t be overstated. The pictures you print, even when they’re simply out of your smartphone, instantly have extra worth. The reprint possibility lets you shortly share with pals and even purchasers. Finally, the Fujifilm SP-Three is a incredible printer that helps to offer extra worth to your reminiscences in a really handy method. That is positively one I like to recommend. It retails for just below $170 and could be bought right here: Fujifilm Instax SP-3.


fbq(‘init’, ‘938393452883301’);
fbq(‘track’, “PageView”);(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); = id; js.src = “”; fjs.parentNode.insertBefore(js, fjs); }(document, ‘script’, ‘facebook-jssdk’));

Shop Amazon